Trump steel tariffs: Harming Egypt’s exports?

US President Donald Trump took the world by storm earlier this month when he pushed forward with plans to impose import tariffs of 25 per cent on steel and 10 per cent on aluminium entering the United States.

The new tariffs are due to come into force 15 days after the order was issued on 8 March. Trump said the levies were necessary for national security reasons and to stop the foreign “assault “on the US.

However, he exempted Canada and Mexico from the tariffs and held out the possibility of excluding other US allies by signalling that the tariff policy was open to more exemptions.

The US is the world’s largest steel importer, buying about 35 million tons of foreign steel in 2017. The decision could harm the Egyptian steel industry, since while Egypt does not export aluminium to the US it does export steel.

Egypt exported 170,000 tons of steel to the US in 2017, Hassan Al-Marakby, deputy head of the Metallurgical Industries Chamber (MIC) at the Federation of Egyptian Industries, said.

This represented a large increase over 2016, he said, adding that if Egypt was not exempted from the new tariffs, it would likely lose these exports.

Al-Marakby also said that the figure had been expected to increase as Egypt has good production capacities and several Egyptian steel companies have potential regarding possible steel exports to the US.

Only two Egyptian companies currently export steel to the US, Ezz Steel and Kandil Steel, he said.

Egypt should push for asking the US for an exemption on the new tariffs, he said, explaining that were this to be granted it could represent an opportunity for Egypt to boost its steel exports to the US by filling the gap created by other countries not likely to be exempted, including Turkey.

Al-Marakby said that Turkey had exported 2.5 million tons of steel to the US in 2017.

“This could give Egypt the chance to boost its steel exports to the US and increase its market share,” he said.

The chamber will be holding talks with the trade ministry, he said, in order to push towards exempting Egypt from the tariffs. Egypt’s steel exports to the US represented three per cent of total US steel imports in 2017.

The decision to exempt Egypt from the new tariffs would likely be a “political” one, Al-Marakby said. If Egypt did not receive the exemption, it could lose up to 170,000 tons of exports and the potential to boost its steel exports to the US in the coming years, he said.

Egypt’s steel exports to the US were worth some $102 million last year, according to figures from the General Organisation for Import and Export Control.

Trade Minister Tarek Kabil said recently that steel exports did not represent more than six per cent of Egypt’s total exports, and that the US share did not exceed three per cent of these.

Egypt’s trade with the US stood at $5.5 billion in 2017, compared to $4.7 billion in 2016, an increase of 13 per cent.

Al-Marakby said he was optimistic about the possibility of exempting Egypt from the new tariffs, even though Egypt was included on a list of 12 countries drawn up by the US Department of Commerce recommending that Trump impose at least 53 per cent tariffs on their steel imports.

Other countries on the list include Brazil, China, Costa Rica, India, Malaysia, Russia, South Korea, South Africa, Thailand, Turkey and Vietnam.

The recommendation on tariffs came as part of a list of remedies drawn up by the US Department of Commerce to address the problem of steel imports.

In a report entitled “The Effect of Imports of Steel on National Security”, it said that the US steel industry had closed six oxygen furnace facilities and idled another four since 2000 because of foreign competition, representing more than half such plants in the US.

It also said that employment in the industry had dropped by 35 per cent since 1998.

Other countries are seeking to be exempted from the US tariffs. The European Union and Japan urged the US last week to grant them exemptions from metal import tariffs.

The EU is also threatening counter-measures that could target US imports into Europe ranging from maize to motorcycles. Under World Trade Organisation rules, the counter-measures have to be in place within 90 days of the US tariffs coming into effect.

European steel and aluminium associations have warned that the US tariffs could mean their sectors shedding thousands of jobs.

Even within the US, experts said that higher US tariffs on imported steel could leave some US steel workers jobless.

Source:http://english.ahram.org.eg/NewsContent/3/12/292911/Business/Economy/Trump-steel-tariffs-Harming-Egypt%E2%80%99s-exports.aspx

Saudi Arabia Steel Pipes and Rebars Market 2017-2021 – Slow Infrastructure Growth to Hit Steel Demand in Saudi Arabia

The “Saudi Arabia Steel Pipes and Rebars Market Outlook to 2021 – Growth of Construction Sector and Oil & Gas Projects is Likely to Drive Demand” report has been added to Research and Markets’ offering.

The report titled “Saudi Arabia Steel Pipes and Rebars Market Outlook to 2021 – Growth of Construction Sector and Oil & Gas Projects is Likely to Drive Demand” provides a comprehensive analysis of steel pipes and rebars in Saudi Arabia.

The report focuses on overall market size for steel pipes and rebars sold in Saudi Arabia, market segmentation of steel pipes by type of steel pipes (seamless, ERW, SAW and LSAW), by sectoral demand (oil and gas, construction and agriculture), by sectoral demand for seamless pipes (oil and gas and construction), by sectoral demand for LSAW pipes (hydrocarbon sector and structural and other demand), by type of LSAW pipes (sour pipes and non-sour pipes), by sectoral demand for ERW pipes (oil and gas and others), by diameter of LSAW pipes (24.0-30.0 inches, 48.0 inches and others) and by grade of LSAW pipes (X60 and X65 and B class pipes); market segmentation of steel rebars by sectoral demand (oil and gas, construction, manufacturing and others), by regional demand (Riyadh, Dammam, Jeddah and others) and by finishing type (fabricated rebars, epoxy coated rebars and black rebars).

The report also covers company profile of major players, competition scenario; import scenario for steel rebars; decision making process, government regulations; growth drivers and trends and issues and challenges. The report concludes with SWOT analysis and market projection for future highlighting the major opportunities and cautions.

Market Dynamics

Growth Drivers and Trends in Saudi Arabia Steel Pipes and Rebars Market

Increase in Large Scale Interregional Oil and Gas Projects
Growing Drilling Activity Fuels Demand for Steel Pipes
Increasing Usage of Seamless Pipes and Tubes
Tremendous Growth in Steel Consumption
Issues and Challenges in Saudi Arabia Steel Pipes and Rebars Market

Growing Competition from Imports: Chinese Manufacturing
Fluctuating Steel Prices in Saudi Arabia
Industrial Environment and Sustainable Development Framework
Slow Infrastructure Growth to Hit Steel Demand in Saudi Arabia
Oil Price War
Key Topics Covered:

1. Executive Summary

2. Research Methodology

3. Saudi Arabia Steel Pipes and Rebars Market Overview and Genesis

4. Value Chain Analysis of Saudi Arabia Steel Pipes and Rebars Market

5. Saudi Arabia Steel Pipes Market

6. Saudi Arabia Steel Rebars Market

7. Decision Making Process adopted by Customers before purchasing Steel Pipes and Rebars in Saudi Arabia

8. Profiling of Major Steel Pipes and Rebars Customer in Saudi Arabia: Saudi Aramco

9. Growth Drivers and Trends in Saudi Arabia Steel Pipes and Rebars Market

10. Issues and Challenges in Saudi Arabia Steel Pipes and Rebars Market

11. Government Regulations in Saudi Arabia Steel Pipes and Rebars Market

12. SWOT Analysis in Saudi Arabia Steel Pipes and Rebars Market

13. Future Outlook for Saudi Arabia Steel Pipes and Rebars Market

14. Analyst Recommendations

15. Macroeconomic Factors affecting Saudi Steel Pipes and Rebars Market

Companies Mentioned

Al-Ittefaq Steel Products Co.
Arabian Pipes Co.
Arcelor Mittal
Atteih Steel Co. Ltd
Global Pipe Co.
National Pipe Co. Ltd
Rajhi Steel Industries
Saudi Steel Pipe Co.
Welspun Corp Ltd
For more information about this report visit https://www.researchandmarkets.com/research/42k44p/saudi_arabia

Media Contact:

Research and Markets
Laura Wood, Senior Manager
press@researchandmarkets.com

For E.S.T Office Hours Call +1-917-300-0470
For U.S./CAN Toll Free Call +1-800-526-8630
For GMT Office Hours Call +353-1-416-8900

U.S. Fax: 646-607-1907
Fax (outside U.S.): +353-1-481-1716

Source:
https://www.prnewswire.com/news-releases/saudi-arabia-steel-pipes-and-rebars-market-2017-2021—slow-infrastructure-growth-to-hit-steel-demand-in-saudi-arabia-300565319.html

Turkey’s manufacturing growth hits fastest rate in almost seven years

Turkey’s manufacturing activity expanded at the fastest pace in nearly seven years in January, a key survey showed on Feb. 1.

According to the Purchasing Managers’ Index (PMI) compiled by IHS Markit and the Istanbul Chamber of Industry (İSO), the headline index rose to 55.7 in January from 54.9 in December 2017.

Any figure greater than 50 indicates overall improvement of the sector.

“Business conditions in the Turkish manufacturing sector improved at a strong and accelerated pace at the beginning of 2018. Bolstered by strong demand, growth in new orders and purchasing activity quickened, leading to the fastest expansion in output observed for almost seven years,” said IHS Markit economist Gabriella Dickens, commenting on the PMI survey data.

The overall performance was the best since March 2011 amid strong underlying demand, read the release, adding that the upward movement in the headline index was supported by sharp and accelerated output growth at the start of 2018.

“Notably, manufacturing output rose at the quickest pace since February 2011. Firms continued to win new business in January, as demand rose domestically as well as globally. This led volumes of new orders to grow at the quickest pace seen in 83 months,” it added.

“Strong production growth was also supported by a further rise in employment during the month, with workforce numbers increasing solidly, albeit at a slightly slower pace,” the release stated.

However, cost burdens also increased sharply amid unfavorable exchange rate movements and higher raw material prices.

The release noted that in response to higher cost pressures, manufacturers raised their selling prices.

The rate of inflation in output charges was the fastest observed over the past 12 months, it added.

source: http://www.hurriyetdailynews.com/turkeys-manufacturing-growth-hits-fastest-rate-in-almost-seven-years-126627

Turkey’s manufacturing sector continues to improve

Turkey’s calendar-adjusted industrial production rose 8.7 percent in December 2017, compared to the same month last year, the Turkish Statistical Institute (TÜİK) announced on Feb. 8.

Industrial output is considered a vital indicator for the economy as it is seen as a preliminary gauge for GDP growth.

Among three main sub-indexes, the mining and quarrying index rose the most, by 14 percent.

The annual increase in the manufacturing index was 8.9 percent, while the electricity, gas, steam and air conditioning supply index was up 5.7 percent.

The term “calendar-adjusted” is used to refer to data without calendar and holiday-originated effects.

The seasonal- and calendar-adjusted production level was also up compared with the same figure for December 2017.

“Industrial production increased by 0.9 percent compared with the previous month,” TÜİK said.

Among the sub-sectors, only the electricity, gas, steam and air conditioning supply sector contributed negatively to the monthly reading, slipping 1.1 percent, according to data.

On a monthly basis, the mining and quarrying index rose 2.6 percent while the manufacturing index climbed 1.2 percent in December.

TÜİK also said calendar-adjusted industrial production rose 7.8 percent in the fourth quarter of last year over the same period in 2016.

In a survey by state-run Anadolu Agency’s Finance Desk on Feb. 6, a group of 11 economists projected the calendar-adjusted industrial production index would rise 6.4 percent year-on-year.

On an annual basis, industrial production in Turkey saw the biggest rise in July, up 14.5 percent.

In Turkish manufacturing activity, the Purchasing Managers’ Index (PMI) for Turkey’s manufacturing sector hit a seven-year high of 55.7 in January amid strong demand and accelerated output growth, according to a Feb. 1 report by the London-based global data company IHS Markit co-prepared with the Istanbul Chamber of Industry.

In December, Turkey’s exports rose to $13.87 billion, up 8.6 percent from the same month of the previous year, TÜİK said on Jan. 31.

Source:http://www.hurriyetdailynews.com/turkeys-industrial-production-rose-sharply-in-december-126995

Major industrial expo opens in Bahrain

The 11th edition of the Gulf Industry Fair (GIF), the Northern Gulf’s leading specialist business-to-business (B2B) event for industrial products and services, opened today (February 6) at the Bahrain International Exhibition and Convention Centre.

The three-day event was inaugurated by the Prime Minister of Bahrain, HRH Prince Khalifa bin Salman Al Khalifa.

The exhibition, organised by Hilal Conferences and Exhibitions (HCE), focuses on industrial development and innovation through a series of initiatives and activities.

The high-profile expo offers companies direct access to a dynamic multi-billion-dollar industrial marketplace and the opportunity to showcase their products and services to a targeted B2B audience consisting of procurement managers, industrialists, purchasers, consultants and decision makers from the region and internationally.

Leading industry leaders showcasing their products at the event include AKGEC, ASNU, Audi Transformers, Al-Ahleia Switchgear, AXA Power, Bahrain Pack, Beka, Bobcat, Doorking, Eazy ERP, Ebara, EMSA, Gossen Metrawatt, Grove, Hyster, Kohler, Lincoln Electric, Manati, MAC Valves, Mahendra Pumps, Metabo, Midal Cables, Manitowoc, Molex, Omicron, Osaki, Perkins, Rexton, Rockwell Automation, Schneider Electric, Taishanbrand and Thorn Security.

Gulf Industry Fair 2018 is being held against a backdrop of falling revenues from oil, bringing into sharper focus the decision by GCC governments to accelerate their economic diversification programmes, said the organisers.

“Despite a regional economic slowdown caused by low oil prices in recent years, ongoing investment in the GCC’s industrial infrastructure remains strong,” remarked Jubran Abdulrahman, the managing director of HCE.

“Notably, Saudi Arabia’s long-term 2030 Vision is likely to be a key driver of the Gulf’s industrial ambitions in the coming years, as the region’s biggest economy accelerates diversification efforts,” he stated.

Abdulrahman pointed out that Gulf Industry Fair 2018 will build on the legacy left by previous editions of the show.

“We are grateful for the unwavering support of the Prime Minister, HRH Prince Khalifa bin Salman Al Khalifa, in helping to establish Gulf Industry Fair as the ‘go to’ exhibition for companies operating in the Northern Gulf’s expanding industrial markets. We are committed to providing the ultimate networking, knowledge-sharing and deal-making platform for all companies involved in the industrial sectors,” he added.

This year’s edition of GIF enjoys the strategic support of Aluminium Bahrain (Alba), Bahrain Petroleum Company (Bapco), the National Oil and Gas Authority (Noga) and Bahrain Investment Wharf. The Industrial Facilities Sector is championed by Majaal.

“We are proud of the quality of this year’s line-up. GIF 2018 sees the launch of the Solar Utilities Network (SUN) promoting renewable energy and the commercial opportunities that will contribute to Bahrain’s industrial development,” remarked Abdulrahman.

The Prime Minister inaugurated the Network today by switching on the SUN logo powered by a solar tree.

The debut SUN initiative will focus on the latest trends in the solar and renewable energy sector and how the industry can benefit from them.

“In addition “Made in Bahrain” manufacturers will be promoting the country’s capabilities in addition to world-class industrial facilities which will add to the business proposition of the kingdom to international and regional investors,” added Abdulrahman.

The exhibition is an annual celebration of the industrial drivers of the growth in the GCC’s economies. GIF promotes the key industrial segments of Aluminium, Industrial Processes and Manufacturing; Industrial Metals (Steel & Alloys); Energy & Environmental Protection; Industrial Facilities; Ports & Maritime Industries; Training for Industry; and Fire, Safety & Security.

Innovative products showcased at GIF include: tooling, solar energy, wireless electricity transmission, smart technology, robotics, floating facilities, aluminium wheels, lighting poles, valves, specialised industrial paints and coatings and compressors.

“Industrial development will require energy to fuel growth. Today, energy requirements are not only about cost-effective power generation but also have to consider environmental concerns,” stated Ahmed Suleiman, the exhibitions director of HCE.

A major highlight of the debut SUN forum will a keynote address by Bahrain’s Electricity and Water Affairs Minister Dr Abdulhussain bin Ali Mirza. It will be held tomorrow (February 7), the second day of the Gulf Industry Fair.-TradeArabia News Service

Source:http://www.tradearabia.com/news/OGN_336412.html

Egypt to establish largest Textile City in Sadat

Tarek Kabil, Industry Minister of Egypt, has announced to set up a textile city in Sadat City. The project will be implemented in five phases by the Chinese firm Man Kay, which owns 25 affiliated companies, according to Egypt’s media reports.

The proposed project in the city will be spread over an area of 3.1 million sq. mt. and house 568 factories, offer employment to more than 160,000 workers and technicians with a total annual production value of US $ 9 billion, as reported.

At least 87 per cent investment of the total paid-up capital of US $ 2 billion will be shared by foreign investors while 13 per cent will come from the local investors.

The Government of Egypt has planned to commence work on this project by March this year and is expected to be completed by 2020. At least 57 factories with a total investment of around US $ 230 million will be set up in the first phase. The fifth and final phase of the project will be completed by 2024.

The project negotiations had begun in May last year and reached an agreement in November to establish a city for the textile and garment industry in Sadat City. This project comes in the framework of strategic cooperation between two nations, Kabil said.

Over the past two years, Sadat City witnessed the opening of 79 new factories in the chemical, food, engineering and electronic and construction materials industries that represents 13 per cent of the total factories opened till date. The textile and apparel industry will now be tapped to generate more revenues from the region.

Source: https://apparelresources.com/business-news/manufacturing/egypt-establish-largest-textile-city-sadat/

Iraq emerging as top infrastructure investment hub

Iraq is emerging from the destruction and strategizing the rebuilding of the country to position itself as a regional super power, said Frost & Sullivan’s recent research report on Assessment of Industry Sector Opportunities in Iraq.

Bridged between Asia, Middle East and African economies and strategically placed at the mouth of Europe, Iraq possesses immense locational advantage as a nation with opportunities that stand to be untapped.

The country benefits from immense natural wealth in the form of its huge reserves of natural resources. Having been brutally battered first by the Gulf war and more recently by the ISIS conflict, Iraq is just emerging from the destruction and strategizing the rebuilding of the country to position itself as a regional super power.

Newer opportunities are emerging with the return of semblance of political stability and initiation of the nation’s redevelopment and The recent report provides a broad overview of the current status of these high priority sectors, apart from providing a brief peek into addressable opportunity areas.
The recent report provides a broad overview of the current status of these high priority sectors, apart from providing a brief peek into addressable opportunity areas.
reformation plans, according to Frost & Sullivan.

Even as the nation’s re-building opportunity proves to be humongous and unique, investors and businesses alike are in need of business intelligence in understanding the right mode of entry, the most rewarding business model and business opportunity, stated the report.

Iraq possesses one of the largest oil reserves in the world, making it a highly attractive business opportunity.

As the country also focuses on diversification initiatives, opportunities unfurl in sectors such as construction, infrastructure, healthcare, transportation, energy and telecom which are being positioned as high priority development sectors, it stated.

The recent report provides a broad overview of the current status of these high priority sectors, apart from providing a brief peek into addressable opportunity areas.

Ali Mirmohammad, senior consultant for Iraq, Frost & Sullivan said: “With the end of the ISIS war, Iraq is on the path of reconstruction and economic resurrection that calls for sustained investment to the tune of over $900 billion within the next decade.”

“Iraq plans to focus on the Oil & Gas downstream value chain as well as minerals value chain, construction and infrastructure industries, healthcare, energy, tourism and financial services sectors to move the GDP growth rate by 10 per cent annually within the next decade,” explained Mirmohammad.

Following the ISIS war, multiple sectors are in a state of disarray and would need massive re-development and newer investments.

“Oil and gas, housing, infrastructure, industry, minerals, and service sectors will account for 65 per cent of the overall investment in the next 10 years, while ICT, transportation healthcare, water, electricity, tourism and renewable energy will grab the remaining 35 per cent investment in Iraq in the next 10 years,” he added.

Mirmohammad pointed out that the country requires over $30 billion per annum of foreign direct investment (FDI) to achieve its reformation and stabilisation goals within the next 10 years.

“With more than 39 million population, Iraq remains and attractive consumer market with potential of over $40 billion,” he added.

Source:https://auto.economictimes.indiatimes.com/news/industry/iraq-emerges-top-infrastructure-investment-hub/62959957

Setting off a trade war over national security

While the US President has power over trade deals and imposing tariffs on international trade, US trade policy on a day-to-day basis is usually in the hands of the US Trade Representative, a government function comparable to a minister of trade in other countries.
It was, however, President Donald Trump himself who slapped import tariffs of 25 and 10 per cent on steel and aluminium, respectively. And he did so on the grounds of national security than for reasons of safeguarding against particular products suddenly entering the US market in increased quantities or via price dumping.

The import tariff plan has not yet been put in effect but nonetheless indicates a willingness to endorse a hardline US foreign trade policy. The issue already has the potential to erupt into a full-blown trade war, with a global backlash brewing.

It set off alarms immediately. Canada and the European Union (EU) already made clear that the US tariff plan is unacceptable, and would consider retaliation through imposing tariffs on a range of branded US goods entering their markets if an acceptable way out is not to be found.

China might also decide to defend its vested export interests to the US by either imposing, or threatening to impose, counter-measures against US manufacturing interests on its soil. Or restrict market access on select US goods entering the market.

Although Canada and China obviously have steel and aluminium supplies to the US, it will be particularly interesting to see whether the EU will try to engage the US in consultative talks before the plan goes ahead or decide to send a target list, signalling retaliation on highly lucrative US exports to the EU.

Indeed, when competitive steelmakers from India made their inroads in high-grade EU steel markets about a decade ago by taking over reputed steel mills in Belgium, France and the Netherlands, some of the EU member-states found the powerful forces of globalisation led by non-European actors hard to accept. In the EU, steel is still seen as more than just a heavy industrial activity but involves national pride and prestige.

But this is only a part of the story.
Gulf states like Bahrain and the UAE will equally closely monitor the looming issue in the US, for their aluminium smelters are reputed players in the sector.

But all-out trade wars are nothing new. The US and the EU have had their fights over tariff and subsidisation issues, starting with chickens in the 1960s and over twin-decked, long-haul commercial aircraft in more recent times.

Recent history demonstrates that industrial sectors tend to call upon their governments for protectionist measures against perceived unfair trade practices such as price dumping when sales stagnate or go into decline. Usually, these issues have been brought to the attention of the watchdog of multilateral free trade.

Indeed, invoking notions like national security, temporary safeguards, or anti-dumping duties is not self-evident, for it involves rules and procedures of the World Trade Organisation (WTO), to which the US has subscribed.

For its new tariff plan, the US invokes national security. But to do so, it will thus have to demonstrate its legitimacy to the WTO. Counter-measures are only justified based on facts and not merely a remote possibility.
Johann Weick is an analyst on trade policies.

Source:http://gulfnews.com/business/analysis/setting-off-a-trade-war-over-national-security-1.2182778

Developing nations cannot fall behind in digital economy

Developing nations cannot fall behind in digital economy
More so as some of the low-cost advantages they used to have will no longer be valid

From cloud computing to artificial intelligence, technology is beginning to revolutionise how the world economy functions. But while these shifts are enriching many in the advanced economies, the developing world is at risk of being left behind.
To improve the global South’s economic prospects and avoid a deepening of inequality, developing-country policymakers must take seriously the implications of these shifts for their economies and their countries’ position in the global economy.

For years, the “digital divide” was narrowly defined in terms of internet connectivity. But today, it manifests itself in the way businesses in rich countries use technology to strengthen their control of global value chains and extract a larger share of the added value created in the developing world.

Consider, for example, how recent innovations threaten the export-oriented industrialisation strategy that has fuelled many countries’ development in recent decades. By using abundant and low-cost labour, developing countries were able to increase their share of global manufacturing activities, creating jobs, attracting investment and, in some cases, kick-starting a broader industrialisation process.
But, for the firms that took advantage of the opportunity to reduce costs by shifting manufacturing to the developing world, there was always a trade-off: offshore production meant limited ability to respond quickly to shifts in consumer demand.

Now, technology may offer another option. By investing in “additive manufacturing”, robots, and other non-human tools, companies could move their production sites closer to their final markets. Adidas, for example, is employing some of these technologies to bring footwear “speed factories” to Germany and the US.

Similarly, as digital technology facilitates the cross-border sale of services, and protections for domestic service providers become increasingly difficult to enforce, domestically oriented services in developing countries will face growing global competition. While such shifts remain nascent, they represent a long-term threat to the development strategies on which many countries in the global South rely.

With advanced and emerging economies moving fast to capture new opportunities created by technology, the digital divide is widening at an accelerating pace. For example, China, which used a protectionist industrial policy to nurture domestic digital giants like Baidu and Tencent, is now supporting these firms as they move deeper into development of new technologies and try to expand globally.

Similarly, the European Union is supporting technology investments through its “digital single market”, and through new policies in areas like venture capital, high-capacity computing, and cloud computing. Indeed, plans for a “European cloud” have been put forth.
There are very few, if any, comparable frameworks currently in place in the global South. This must change, but how?
Development strategists often suggest that poor countries cannot afford to dedicate resources to the digital economy. While that is true to some extent, failing to account for technology-driven economic trends will merely exacerbate the problem.

In fact, such trends should be at the centre of national development strategies. Moreover, at a regional level, there is a need to analyse technology-driven economic shifts and design policies that take advantage of the opportunities they represent, while coping with the associated challenges.

In Africa, for example, ongoing efforts to develop regional trade links and boost industrial cooperation — including frameworks like the Continental Free Trade Area (CFTA) initiative and Agenda 2063 — should include a focus on digital transformation strategies. Discussions on this front should be informed by lessons from other regions, such as the EU.

This should occur in the context of broader efforts to help local firms expand and become more competitive internationally. Too often, excitement for Africa’s innovative start-up ecosystem masks the challenges, such as small and fragmented domestic markets, that could impede long-term success.

Digital technology has already been put to good use in many parts of the developing world. Data-driven farming techniques are helping growers achieve higher yields, while mobile finance is broadening financial inclusion in poor communities. But these innovations will not be enough to prevent developing countries from falling behind in the global economy.

To catch up with the global North, policymakers will need new tools.
To invest in those tools, developing countries will also need support from international organisations. For example, ongoing World Trade Organisation discussions about the rules that will govern the digital economy should be expanded to include strategies for levelling the global playing field.

Overcoming the resource constraints that limit developing countries’ investment in the digital economy will not be easy. But failing to do so will carry a steeper price. As leaders in the developing world seek to position their countries for sustainable growth, they must think globally and locally, without losing sight of the role that technology will play in shaping the economy of tomorrow.
The writer is a professor of international development and international political economy at the University of Bath and a visiting fellow at the London School of Economics and Political Science.

Source:http://gulfnews.com/business/analysis/developing-nations-cannot-fall-behind-in-digital-economy-1.2180219

UAE aims to attract $75b in manufacturing sector by 2025, economy minister says

Abu Dhabi: The UAE is aiming to attract $75 billion by 2025 into the country’s new industrial manufacturing sector, the UAE economy minister said in Abu Dhabi on Monday.
In his inaugural address at the world’s first Global Manufacturing and Industrialisation Summit, Sultan Bin Saeed Al Mansouri also said the manufacturing sector will contribute 25 per cent towards the country’s GDP by 2025.

“Manufacturing is central to growth and it creates jobs and it also has a great impact on the society. We have a vision and strategy to achieve this,” he said.
“The UAE is a de facto capital of new Silk Road with sea lanes, airports and logistical hub. We have an excellent geographic location between emerging markets like India and China and developed markets in Europe and North America.”
He said the new UAE investment law, which allows one hundred per cent ownership to foreigners, will boost the manufacturing sector.

His Highness Shaikh Mohammad Bin Rashid Al Maktoum, Vice-President and Prime Minister of UAE and Ruler of Dubai attended the opening ceremony along with Shaikh Hamdan Bin Mohammad Bin Rashid Al Maktoum, Crown Prince of Dubai and Shaikh Saif Bin Zayed Al Nahyan, Deputy Prime Minister and Interior Minister of the UAE.
Some ministers of the UAE cabinet including energy minister Suhail Al Mazroui were also present.
More than 1,200 businessmen and global leaders are attending the three-day Global Manufacturing and Industrialisation Summit being held under the patronage of His Highness Shaikh Mohammad Bin Zayed Al Nahyan, Crown Prince of Abu Dhabi and Deputy Supreme Commander of the UAE Armed Forces.
The summit is being jointly organised by the UAE Ministry of Economy and the United Nations Industrial Development Organisation (Unido).
It is the first global gathering for the manufacturing community, bringing together leaders in business, government and civil society to shape a vision for the sector’s future.
A number of high profile ministers and industry leaders from the region as well from across the globe are attending the four day summit.

Source:http://gulfnews.com/business/sectors/manufacturing/uae-aims-to-attract-75b-in-manufacturing-sector-by-2025-economy-minister-says-1.2001443